Item # 21064001Bearing used in the top and bottom of spindle housing. Advertised price based on quantity of one.
Item # 31064003This is the left spindle used for all NC model quarter midgets. Bearings sold separately.
Item # 31064005The Standard Right spindle is used with the 1900 and Pro 2k front axles.
Item # 31064008The Extended Right spindle is used with any front axle that has a black adjustable Castor block.
Item # 31039004This Castor block is used on the 02-Grizz front axle and the G9-G17 front axle. There is roughly two degrees between each line for castor placement and 1.5 degrees between camber dot locations.
Item # 21039002The Camber block sets on top of the Castor block. The 4 numbers engraved on each side of the Camber block allows for small increments of change with each rotation from one number to the next.
Item # 21064002There are two options for this bolt. The bolt with a shoulder length of 3" is used with the black castor blocks and on the left side of any axle that does not have a black castor block bolted to the axle. The bolt with a shoulder length of 3.25" (21064003); is used on the right side of any axle that has a steel camber block welded to the top of the spindle mount.