Zep-Par NC #21028000 is a quick dry silicone that works great for the chain to reduce heat and limit the mess common with non-drying silicone sprays. Is also a great protection of steel bolts to help keep away rust billed-up. Price- $14.00 per can
Fits all Grizz models.
FK Rod End Gold Series Rod End, JM Series, 3-piece, Low Carbon Steel, Male 5/16 in.-24 Thread Size, 0.313 in. Bore. Right hand thread.
FK Rod End Gold Series Rod End, JM Series, 3-piece, Low Carbon Steel, Male 5/16 in.-24 Thread Size, 0.313 in. Bore. Left hand thread.
This deluxe kit has most components needed for Honda and Briggs engines. Proper sealant tape should be used on all pipe threads to avoid fuel leaks.
Sold in packs of three. These hub nuts require a 1/2" socket and are for a 1/4-28 bolt thread.
This system raises the engine only 3/8 of an inch; which has been excellent for reducing chain tension problems! The NC engine mount was designed for NC model cars that have the current engine straps welded onto the frame. The base plate mounts underneath the engine straps. The top plate can be bolted to the engine and the base plate clamp holds the rear portion of the base plate firmly; while a jack screw is incorporated to assist in keeping the engine stationary.
This is a convenient bracket for the Mychron 5 Reciever to be mounted directly to the sheet metal body. Requires three holes to be drilled in the body to be mounted. Try to make sure the sensor is as flush as possible with the outside of the body for little to no interference. Sensor will need to be mounted so it is facing the outside of the track; to locate the beacon.
NC CHASSIS COMPANY1